Back to Flat-top cranes
Potain flat-top tower crane
MCT385A
20 tonnes and a 75-metre jib, for residential and commercial towers with room to work overhead.
20t
Max capacity
75m
Max jib
3.4t
At jib end
Specification
How it fits the range
| Model | MCT 385 A L20 |
| Type | Flat-top |
| Maximum capacity | 20 t |
| Maximum jib length | 75 m |
| Capacity at jib end | 3.4 t |
What these terms mean
- Flat-top
- The jib stays horizontal. Simpler and cheaper to erect where there is room overhead and nothing close by to swing around.
- Load curve
- How much the crane can lift at each distance from the tower. The further out the hook goes, the less it can carry.
- At jib end
- What the crane lifts at the very tip of the jib. That is the furthest reach, and the point where it carries the least.
The MCT385A is one of 6 flat-top cranes in our range. It is a flat-top: the jib stays horizontal, which is the simpler, quicker crane to erect where there is room overhead.
In the group, the MCT565A is the next size up (25 t, 80 m jib) and the MCT325 is the next size down (16 t, 75 m jib).
Load curve
How much it lifts at each radius.
The most the MCT385A can lift at each distance from the tower, taking the best of the jib lengths in its Potain datasheet. Hover to read any radius.
MCT385A · best of every jib length · read from the Potain datasheet
Check the chart for your exact setup before planning a lift.
Flat-top cranes
